Shopping Cart

Gaco Roof Coatings

If you are planning to install a new roof in your home, consider installing Gaco roof coatings. These coatings form a weather-tight seal on the roof of your home. They prevent water leaks and UV rays. They are suitable for all kinds of rooms. The coating should be mixed correctly, then applied using a roller with a one-inch cover. You can use different colors of Gaco roof for the first coat.


The LM60 GacoFlex Liquid Urethane Roof Coating is a 100% solids, solvent-free, odorless polyurethane. It is recommended for use as a high-build waterproofing membrane, and is designed for vertical and horizontal applications. Its excellent resistance to water immersion makes it a preferred choice for many roofing applications. It is also suitable for use on curved and sloping structures.

This waterproofing elastomeric coating features excellent water resistance, hardness, adhesion, and sealant properties. It can be applied by brush or roller. It can also be applied over primed metal roofs. It is available in a variety of colors. LM60 is an economical choice for many roofing applications. LM60 offers excellent resistance to ultraviolet rays, UV rays, and ultraviolet rays, and has a tensile strength of 30,000 PSI.

The LM60 offers excellent adhesion to concrete and clean, dry plywood surfaces. It is also VOC-compliant. Part B should be mixed with part A before applying to a surface. Make sure to provide sufficient ventilation for the application site. Wear a particulate matter mask to avoid breathing in toxic gasses. The LM60 also offers excellent adhesion to concrete, but primers may be required to protect other surfaces.


The GacoS2100 is an environmentally friendly, solvent-free, high-solids, 100% silicone roof coating. It is designed for high-quality protection against leaks, permanent ponding water, and environmental deterioration. The S2100 has exceptional whiteness and solar reflectivity. This product also features 37% recycled content and outstanding film build, and is suitable for use on flat roofs. It is also highly durable and resistant to environmental factors, including extreme heat, UV rays, and cold.

Harwich House in Massachusetts installed the Gaco S2100 roof coating to protect its historic property. This large condominium complex replaced many sections of its roofing and siding and coated its flat areas with the product. The roof was fully adhered to the EPDM membrane, cleaned thoroughly, and coated after asphalt sections. The Gaco S2100 coating will extend the life of the roof by 50 years! After installation, the entire roof is waterproofed and ready for the next stage of repair.

To ensure the durability of the GacoS2100 roof coating, contractors must follow certain guidelines. First, the contractor must ensure the material and workmanship of the roof coating is free from defects. Second, the contractor should make sure the weather is dry enough so that there is no risk of wind or rain. Otherwise, the installers may be forced to replace parts of the roof without a warranty. Moreover, the contractor should calculate the number of gallons required to achieve the minimum dry mils.